How to use the Water tanker truck
date:2025-01-02
As a traditional irrigation tool, the use of Water tanker truck depends mainly on the specific type and design of the waterwheel, but the basic principles are similar. Here are the general steps for using a Water tanker truck to irrigate farmland. Prepare the Water tanker truck: Make sure the Water tanker truck is structurally intact and not damaged. This includes checking the waterwheel, frame, water tank and other parts.
If it is a traditional human-powered Water tanker truck, it also needs to be cognitively active, well lubricated and unobstructed. Position the waterwheel: Place the waterwheel near a water source (such as a river, stream, well or pond) and irrigate the farmland from it. Water: For some small or simple waterwheels, manual buckets or containers may be needed to disturb the water in the pool of the waterwheel.
If it is a large Water tanker truck driven by water flow, the manual loading capacity is consumed and the waterwheel automatically draws water from the water source. Drive the waterwheel: Human-powered: A person is required to push the wheel of the waterwheel to start the rotation and drive the water to a high place, and the water flow naturally irrigates the farmland. Water flow driven: Use the water flow to hit the waterwheel, naturally rotate the waterwheel, raise the water level and irrigate. Control irrigation: Adjust the outlet of the water truck or set up water diversion facilities so that the water flow evenly covers the required area. Adjust the water flow rate and irrigation volume according to the crop irrigation needs and soil conditions.
Maintenance and observation: During use, regularly check the operation of the Water tanker truck to ensure efficiency and repair damaged parts in time. Observe the dryness of the farmland and adjust the irrigation strategy in time. The operation method of modern improved sprinkler trucks (sometimes also called water trucks) is more automated, generally including the following steps: Check the vehicle: Make sure that all parts of the vehicle are normal, especially the water tank, pump, pipe system and nozzle. Add water: Drive the vehicle to the water source, open the tank assembly, connect the water pipe to add water, and request the required water level. Start the operation: Enter the cab, start the vehicle, activate the power take-off, and then start the pump. Adjust the water flow and spraying mode through the control panel.
Driving and spraying: Drive the vehicle slowly along the edge of the farmland, while water is sprayed evenly on the farmland through the nozzle. Operation completed: After irrigation, first turn off the pump, then stop the vehicle, and finally complete the cleaning and maintenance of the vehicle. Whether it is a traditional water truck or a modern sprinkler truck, you must pay attention to safety when operating it to ensure that no damage is caused to the operator or the farmland.
If you are interested in Water tanker truck , pls contact me for best service.
HOWO TRUCK EXPORT CO., LTD
General Manager:Betty Han
Mob/Whatsapp/Wechat: +86 13734412206
E-mail:manager@howotruckexport.com
Website:www.howotruckexport.com